fiber-optic-indonesia

Mengenal Fiber Optic Indonesia, Seberapa Penting Manfaatnya untuk Jaringan Telekomunikasi?

Kebutuhan akan teknologi yang semakin besar, menuntut semua pekerjaan bisa dilakukan dengan cepat di berbagai bidang. Salah satu komponen pendukung terciptanya teknologi yang terkoneksi satu sama lain adalah dengan pemanfaatan fiber optic Indonesia.

Di dalam negeri sendiri, panjang jaringan fiber optic mencapai 360 ribu kilometer yang dibangun lintas darat hingga laut. Untuk komunikasi kabel laut sendiri sepanjang 115 ribu kilometer, sudah termasuk 55 ribu kilometer pada Zona Ekonomi Eksklusif.

Lantas apa saja manfaat lengkap dari penggunaan fiber optic Indonesia?

Manfaat Lengkap Fiber Optic Indonesia untuk Mendukung Perkembangan Teknologi Modern

Agar lebih paham seberapa penting keberadaan fiber optic Indonesia, kamu bisa mendapatkan informasi lengkap tentang manfaatnya disini.

1.Untuk Backbone Jaringan Telekomunikasi

Pada umumnya, fiber optic digunakan sebagai backbone untuk mendukung jaringan telekomunikasi. Misalnya saja dalam membantu menghubungkan jaringan antar pulau, jaringan antar kantor cabang, jaringan antar gedung dan lain sebagainya.

2.Transmisi Jutaan Data dengan Lebih Mudah

Fiber optic di berbagai bidang sangat membantu dalam memudahkan transmisi jutaan data setiap harinya dari satu tempat ke tempat lainnya, baik antar pulau, antar kantor cabang dan kebutuhan transmisi data lainnya.

3.Fiber Optic Menawarkan Kecepatan yang Lebih Tinggi

Jika dibandingkan dengan transmisi jenis lainnya seperti UTP atau tembaga, fiber optic Indonesia jelas menawarkan kecepatan yang lebih tinggi. Kecepatannya berkali – kali lipat dari kecepatan tembaga. Selain itu, dari segi konsistensi juga jauh lebih baik.

4.Jangkauan Jarak Lebih Jauh

Pada kabel berbahan tembaga, biasanya hanya mempunyai jangkauan maksimal 100 meter saja. Namun dengan menggunakan kabel fiber optic, jangkauannya bisa mencapai 40 kilometer tanpa menggunakan bantuan alat penguat sinyal.

5.Lebih Minim Gangguan

Cara kerja kabel fiber optic yang memanfaatkan cahaya, membuatnya menjadi minim terhadap gangguan karena tidak terpengaruh oleh adanya berbagai gelombang elektromagnetik. Berbeda halnya jika menggunakan listrik, yang terpengaruh terhadap gelombang elektromagnetik. Fiber optic juga terbukti kebal terhadap berbagai macam kondisi seperti perubahan cuaca, kelembapan, cuaca buruk, hingga semua hal yang dapat memicu gangguan pada konektifitas kabel tembaga.

6.Menawarkan Biaya Kepemilikan yang Lebih Murah

Memang betul, pengeluaran di awal yang harus digelontorkan dalam penggunaan fiber optic Indonesia bisa lebih besar. Namun perlu kamu pahami, justru dengan mengandalkan serat dan ketahanan yang dimiliki oleh fiber optic, jika dihitung secara keseluruhan ternyata mampu membuat biaya total kepemilikan (TCO) menjadi lebih rendah dan murah. Seiring kemajuan teknologi, biaya yang dibutuhkan terkait dengan komponen dan kabel serat optic juga kian menurun.

Exfo Indonesia Menjadi Brand Unggulan Pendukung Telekomunikasi

Exfo Indonesia menjadi salah satu brand produk fiber optic yang layak kamu pertimbangkan karena sudah terbukti dari segi kualitas. Di Indonesia sendiri, penggunaan Exfo fiber optic sudah tersebar luas. Mulai dari penggunaan untuk menghubungkan antar kantor cabang maupun antar pulau.

Selain itu dengan didukung penuh oleh berbagai alat fiber optic canggih dan modern yang kami sediakan, bisa memaksimalkan fungsi dari Exfo Indonesia. Didukung penuh dengan OTDR (Optical Time Domain Reflector) selama proses pemasangan hingga perawatan, sehingga dari segi kualitas pun sudah memenuhi standar keamanan.

Masih bingung mencari referensi produk fiber optic terbaik? Jika sudah ada yang jelas kualitasnya, mengapa harus pilih yang lain. Perangkat Fiber optic Indonesia dengan brand Exfo Indonesia, menjadi pilihan terbaik untuk membangun jaringan telekomunikasi yang andal, profesional, aman dan tahan lama.

ex1_front_2000x1652

EX1 – FTTH and Business Services tester

The smallest Gigabit, GPON and WiFi testing solution available

Simple. Open. Carrier-grade. Multipurpose.

Get your hands on the first pocket-sized test solution that evolves with your network, from validating bandwidth speed to monitoring residential and business customers’ quality of experience (QoE).

pmd-350d_1

PPM-350D – next-gen PON power meter

To provide the right speeds to the right customers, communications service providers (CSPs) are deploying next-gen and legacy passive optical network (PON) technologies by overlaying multiple new wavelengths on existing fibers. This brings new challenges for quick and accurate testing during the critical service activation phase: CSPs need power meters capable of testing next-gen and legacy PON technologies, and their field teams need to be sure they are correctly testing the right technology.

The PPM-350D was designed to tackle both challenges head-on with its unique PON-aware™ technology. Developed in partnership with a Tier 1 CSP, the PPM-350D PON Power Meter automatically detects and adapts test parameters for the PON technology in use at the customer premises, eliminating costly guesswork by field technicians. As a result, service providers can deploy faster, cut activation costs and boost customer satisfaction.

ox1_1_2000x1667

Optical Explorer – industry’s first optical fiber multimeter

Fiber optic tester that performs link verification and automated fault tracking in seconds. Empowering frontline technicians to explore further and do more.

Evaluate the quality of fiber links in seconds.

An innovative, fast and simple-to-use fiber optic tester, Optical Explorer verifies optical links in seconds and automatically explores further when potential issues are suspected. It’s the first optical fiber multimeter (OFM)—an essential handheld tool for fiber optic technicians (it can be compared to multimeters used by electrical technicians). OFMs quickly measure multiple key optical parameters such as loss (dB), optical return loss (dB), length (meters) and power (dBm). They help technicians verify fiber optic link health and troubleshoot potential issues.

exfo-image_ftb-2-pro_2000x1652

FTB-2/Pro – platform

Unparalleled performance and next-gen connectivity

The FTB-2, available in a standard or Pro model, is the most compact solution on the market for multirate, multitechnology, multiservice testing, delivering all the power of a high-end platform in a conveniently sized, go-anywhere field-testing tool.

A sum greater than its parts

Nowadays, with the complexity and extent of modern networks, technicians need more than a few tools in their belt to get the job done right the first time. They need OSAs, Ethernet multiservice modules and OTDRs with fiber inspection probes. You name it, the technician needs it. But what makes the supertech “super” is the ability to drill down effortlessly and perform all tests quickly and accurately, cutting costs and saving time. That’s the added value, and that’s one of the many advantages that the FTB-2 brings to the table.

FTB-2 Pro model

So much power, such a small footprint

The FTB-2 Pro is by far the smallest, most compact high speed multitechnology test platform out there. The FTB-2 Pro offers the most versatility: This is your go-anywhere, test-anything platform.

Designed for applications such as:

  • Fiber characterization
  • Gigabit/10G Ethernet configurations
  • ROADM commissioning
  • Multiservice transport testing
  • 100G testing
exfo-image_ftb-1v2_pro_dc_2000x1652

FTB-1v2/Pro – single- or dual-carrier platform

dapted for dedicated applications. Dedicated to helping you adapt.

The FTB-1 version 2, available in standard (FTB-1v2) or Pro (FTB-1 Pro) models, is a light-weight compact test platform allowing field technicians to carry out dedicated optical, Ethernet, multiservice and radio frequency (RF) interference test applications simply and efficiently, thanks to its ultra-powerful processing and highly intuitive interface.

Module

FTBx-88200NGE Power Blazer – 100G multiservice test module

Get ready to test your next-generation 100G network

The growing demand for more bandwidth and the proliferation of data centers and inter-data-center connectivity is fueling the growth of 100G networks. Network equipment manufacturers (NEMs) are responding with solutions that are better suited to the mass deployment of 100G in the network with the inclusion of high-speed pluggable CFP4 and QSFP28 interfaces that lower costs and offer increased port density.

EXFO’s FTBx-88200NGE Power Blazer is the first test solution to offer integrated CFP4 and QSFP28 interfaces, making it ready for the 100G network evolution.

Optical transport testing

  • Complete OTN and SONET/SDH overhead manipulation and monitoring for advanced testing and troubleshooting.
  • Advanced Multichannel OTN tool, which supports single-stage multiplexing from ODU0 to ODU4 with the support of 80 concurrent channels, including channelized service disruption measurement of all channels.
  • ODUflex, which provides a future-proof solution to transporting any client signal at any rate.
  • Ethernet and SONET/SDH mapping over OTU3/OTU4, enabling NEMs to qualify their 40G/100G transponder development (e.g., mapping and demapping capabilities), as well as client-signal timing transparency.
  • Delay measurement for OTN, SONET/SDH and Ethernet traffic across all supported testing interfaces.

Ethernet performance assessment

  • Ethernet traffic generation and monitoring to simultaneously simulate and qualify different applications.
  • EtherSAM, an ITU-T Y.1564 Ethernet service activation methodology that comprises a service configuration test and service performance test for comprehensive field testing of mobile backhaul and commercial services, as well as QoS validation for better troubleshooting.
  • iSAM, an intelligent service activation methodology providing simplified ITU-T Y.1564 and RFC 6349 testing.
  • RFC 6349 test methodology for validation of end-to-end TCP service, helping to correctly locate and diagnose issues as they arise.

Rapid diagnostic test tools

  • Per-wavelength laser control and power measurements to catch high power levels that could damage circuits or low power that may result in signal degradation.
  • Per-lane frequency and offset measurements to determine network health prior to BER testing during 40G/100G network commissioning.
  • IP connectivity tools, including a ping tool that verifies whether a user can reach a specific address within or outside of a subnetwork.
  • 100G Through mode testing tool that sectionalizes traffic between networks and customer premises equipment by transparently monitoring Ethernet traffic between two endpoints.

Advanced troubleshooting tools

  • Packet capturing tool offering comprehensive filtering, triggering and truncation methods to target specific traffic and quickly pinpoint issues in either the lab or in the field.
  • Advanced traffic filtering through up to four trigger fields and operands for troubleshooting of particular traffic flows.
  • iOptics—Intelligent Pluggable Optics test application: this first-alert test can be used in the field or lab environment to efficiently evaluate proper operation of an optical device with minimal user configuration required.

Push data to the cloud and get connected

  • EXFO TFv—Test Function Virtualization, including FTB Anywhere floating licenses and FTB OnDemand time-based licenses to scale testing requirements to specific needs
  • EXFO Connect to push and store test data content automatically in the cloud, streamlining test operations from the build-out to maintenance phases.
ftbx-8870-8880_1 (1)

FTBx-8870/8880 Power Blazer – 10G multiservice test modules

Complete and agile testing of 10G services

From development in the lab to troubleshooting in the field, EXFO’s FTBx-8870/8880 Power Blazer features a full suite of test capabilities with a range of technologies up to 10G.

Key DSn/PDH and SONET/SDH

  • Preconfigure user-defined bit-error-rate (BER) thresholds prior to running tests. Results are easy to interpret thanks to a simple pass/fail verdict at the conclusion of tests.   

Key Ethernet features

  • Intelligent network discovery mode enables you to single-handedly scan the network and connect to any available EXFO datacom remote tester, with no need for an additional technician at the far-end to relay information.
  • Smart Loopback functionality offers five distinct loopback modes adjusting to all unique loopback situations.
  • Dual-port testing makes it possible for a single technician to launch EtherSAM or RFC 2544 tests using a single module and to obtain bidirectional results.
  • Support for virtual-local-area-network (VLAN) tags, Q-in-Q VLAN tags and multiprotocol label switching (MPLS) to enhance security, scalability, reliability and performance.

EtherSAM: the new standard in Ethernet testing

EXFO’s EtherSAM test suite—based on the ITU-T Y.1564 Ethernet service activation methodology—provides comprehensive field testing for mobile backhaul and commercial services, including critical service-level agreement (SLA) criteria such as packet jitter and quality-of-service (QoS) measurements.

EtherSam bidirectional results

Key SLA parameters are measured independently in each test direction, providing 100% first-time-right service activation—the highest level of confidence in service testing.

EtherSAM service configuration test

Sequential testing of each service to validate that it is properly provisioned and that all specific key performance indicators (KPIs) or SLA parameters have been met.

EtherSAM service performance test

Once the configuration of each individual service has been validated, the service performance test simultaneously validates the quality of all the services over time.

EtherSAM bidirectional results

  • Executes the complete ITU-T Y.1564 test with bidirectional measurements.
  • Key SLA parameters are measured independently in each test direction for 100% first-time-right service activation.

iSAM: simplified Y.1564 (EtherSAM) and RFC 6349 testing

  • With iSAM, the emphasis is on minimalism and simplicity, making both the Y.1564 (EtherSAM) and RFC 6349 testing methodologies as straightforward as possible for all users.
  • Only a small number of steps are required to set up, run and receive valid test results.
  • One-page setup facilitates the setup and running of iSAM tests for field technicians of all skill levels.

Cable test with power over Ethernet (PoE)

  • Technicians can troubleshoot any cabling or installation issue by checking the cable’s actual pin-out, wire map, cable length, distance-to-fault measurement and propagation delay.
  • Adding PoE means technicians can check for the following: presence of power, the power-supply equipment type, power class rating, voltage, current and power in watts.

FTTA Testing

The FTBx-8870/8800 CPRI protocol feature verifies that a remote radio head (RRH) is fully operational and that the correct small form-factor pluggable (SFP) transceivers are installed and properly connected.

  • With the layer-2 CPRI protocol, technicians can easily connect to the RRH without having to climb the cell tower.
  • Once connected to the RRH, the Power Blazer is able to supply the technician with a complete analysis of vital CPRI statistics.

Traffic generation and monitoring

  • Technicians can configure up to 32 streams of traffic in order to test just about any frame format including: Ethernet II, 802.3, SNAP, IPv4, IPv6, three levels of VLANs, MPLS, UDP and TCP.
  • A new virtual frame display that allows field technicians to easily configure multiple streams and their parameters makes it possible to test layer-2 protocols, including: Cisco discover protocol (CDP), VLAN trunking protocol (VTP) and link-layer discovery protocols (LLDP) 

RFC 6349 service activation methodology

  • RFC 6349 validates end-to end TCP services and helps correctly locate and diagnose issues as they arise.
  • The RFC 6349 test helps resolve discrepancies between service-provider networks and customer premise equipment through:
    • Maximum-transmission-unit (MTU) size discovery
    • Baseline round-trip delay determination
    • Single or multiple TCP connections to enable full pipe testing

Carrier Ethernet operations, administration and maintenance (OAM)

  • The FTBx-8870/8880 adds extra packet-capturing capabilities, including comprehensive filtering, triggering and truncation methods to target specific traffic and quickly pinpoint issues in the lab and in the field.
  • Advanced traffic filtering using up to four fields and operands makes it possible to troubleshoot a particular traffic flow.

Performance assessment of Fibre Channel services

Since most storage area networks (SANs) cover large distances, and because Fibre Channel has stringent performance requirements, it is imperative to test each phase of network deployments to ensure appropriate service levels. In addition to full wire-speed traffic generation at the FC2 layer, the FTX-8870/8880 modules also support:

  • Proper characterization of latency for FC services.
  • Buffer-to-buffer credit estimation, a configuration parameter that estimates buffer credit values with respect to latency by calculating the distance according to round-trip latency times.
  • Switch-fabric login capability to support connections to a remote location through a fabric or semitransparent network.
exfo-image_ftb-4-pro_2000x1652 (1)

FTB-4 Pro – platform

Versatile multitechnology portable test platform

The FTB-4 Pro delivers all the power of a high-end platform in a go-where-you-need field-testing tool.